基于劳动节约的技术价格模型

本文根据新技术的采用带来劳动时间的节约原理建立技术价格模型，提出建模的理论依据和计算方法，利用生产函数确定模型中的重要参数，并给出参数算法示例。     

RIBLL1终端实验装置

描述了一套HIRFL的放射性核次级束流引起反应测量的实验装置,它由RIB鉴别、测量系统、次级靶控制系统和次级反应产物鉴别、测量系统组成.高增益分组延迟线读出、重心定位PPAC,横向场IC,椭球面镜聚焦、PMT读出、闪烁薄膜时间拾取器,双叠层纵向场阳极分条读出IC,PMT矩阵读出x—y位置灵敏Phoswich闪烁探测器,康普顿抑制HpGeγ探测器等单元是这套装置的基本部件.目前,该装置已安装在兰州重离子加速器RIBLL1终端.性能测试和实验研究正在进行.     

Novel 53/106 GHz Dual-Band MMW LC Oscillator Implemented in SiGe BiCMOS Technology

In this Paper, we present a fully integrated millimeter wave LC voltage-controlled oscillator (VCO), which employs a novel topology, operating at dual-band frequency of 53.22 GHz-band and 106.44 GHz-band. The low-phase noise performance of –107.3 dBc/Hz and –106.1 dBc/Hz at the offset frequency of 600 kHz, –111.8 dBc/Hz and –110.6 dBc/Hz at the offset frequency of 1 MHz around 53.22 GHz and 106.44 GHz are achieved using IBM BiCMOS-6HP technology, respectively. Two tuning ranges, of 52.7 - 53.8 GHz and 105.4 - 107.6 GHz for the proposed LC VCO are obtained. The output voltage swing of this VCO is around 1.8 V_p-p at the operation frequency of 53.22 GHz and 0.45 V_p-p at 106.44 GHz; the total power consumption is about 16.5 mW. To our knowledge, this is the first oscillator which operates at dual-band frequency above 50 GHz with the best preformance.     

发光二极管材料与器件的历史、现状和展望

文章介绍了发光二极管材料和器件的研究、开发的历史，概述了发光二极管技术的发展现状和进展．通过与其他类型光源的比较，向读者展示了发光二极管未来的重要地位和光明前景．发光二极管的最近的成就是实现了有色光方面的成功应用．高功率白色发光二极管已开始应用于便携式和特殊照明．而在通用的照明领域要成功地应用发光二极管，则需要通过性能和价格方面的继续突破来实现．     

生物组织血液灌注率的无损测量研究

本文提出了无损测量生物组织血液灌注率的体表绝热法。推导出了体表绝热时生物组织内温度响应的一维解析解。采用二维生物传热模型,分析了生物组织有限厚度、体表有限绝热面积和血液灌注率分布不均匀的影响。对人体组织的血液灌注率进行了测量,实测温度响应与理论预测值吻合。由于利用的只是体表的瞬态温度信息,对生物组织不会造成损伤,也不会干扰生物组织正常的生理状态,整个测量系统也比较简单。     

基于光信号偏振度的偏振模色散补偿系统的研究

偏振模色散已成为当前发展高速长距离光纤传输系统的主要限制因素。理论上分析了光纤一阶偏振膜色散效应对高速伪随机非归零码／归零码光信号偏振度的影响，并利用数值模拟的方法分析了信号不同输入偏振态以及高阶偏振膜色散效应对非归零码光信号偏振度的影响。最后对利用信号偏振度作为反馈控制信号的自适应偏振膜色散补偿系统的补偿性能进行了分析，大量统计分析结果表明对于10Gbit／s的非归零码光纤传输系统，当传输线路的平均偏振膜色散值小于43ps时，利用极大化输出信号偏振度的偏振膜色散补偿系统对信号眼图的补偿概率可以达到99．99％．     

The transport current redistribution between the core layers on the models of HTS cables

The multilayer conductors with insulated and non-insulated layers are analyzed. The space–time current redistributions between the layers of the conductor are investigated for the next parameters: values of electric resistance at the current leads, transverse contact electric resistance between the layers, the model length, time, the conductor dimension, the current—its peak value, the change law and the ramp of the total current input. Most of the published test results for short (from 1 to 10 m) conductor models do not reflect the true current distribution of the real long length cable conductors. The criterion of experimental model constructions and, in particular, the calculation of its minimum length are presented. The calculations demonstrate the electromagnetic processes in real cable conductors.     

第一讲进入21世纪的声纳技术

海洋开发和反潜战的需求是推动声纳技术开发的巨大动力.水声物理、水声信号处理及相关学科的发展又促使声纳设计日趋完善.文章介绍了声纳技术在进入21世纪时所面临的机遇和挑战,水声信号处理领域近期研究的热点问题以及声纳系统设计中的技术创新课题.     

梯度折射率透镜在口腔内窥镜中的设计与应用

作为口腔内窥镜的摄像镜头，利用梯度折射率透镜质量轻、体积小、结构简单、分辨率高、成像景深大的优点，研制出一套适合医患交流及进行口腔检查与治疗的医疗装置。采用修正折射率剖面的梯度折射率透镜, 降低系统渐晕，减小畸变,获取口腔内部图像，经CCD光电转换装置转换成电信号，再将电信号经过数字信号处理以后，将该数字信息存储于计算机内部或在显示器上显示出来。口腔内窥镜是集梯度折射率透镜、光学原理、光学材料与加工、微电子、数字成像技术等为一体的新型医疗设备。特别是采用经修正的梯度折射率透镜制造的口腔内窥镜成像清晰, 在图像畸变、景深等方面优于现有产品，而且便于对患者的各种信息进行管理、查询、输出等。     

Stability measurements on cored cables in normal and superfluid helium

The relative stability of LHC type cables has been measured by the direct heating of one of the individual strands with a short duration current pulse. The minimum energy required to initiate a quench has been determined for a number of cables which have a central core to increase the effective inter-strand cross-over resistance. Experiments were performed in both normal helium at 4.4 K and superfluid at 1.9 K. Conductors in general are less stable at the lower temperature when measured at the same fraction of critical current. Results show that the cored-cables, even when partially filled with solder or with a ‘porous-metal' filler exhibit a relatively low stability at currents close to the critical current. It is speculated that the high inter-strand electrical and thermal resistance inherent in these cables may affect the stability at high currents.